| |
|
|
Please scroll to view all Flying Rotary Cutters
|
FS 150
-
Controller for Flying Shears and Saws |
FS-150 Specifications
|
- Stand-alone unit for full control of the speed profile of the carriage
- Extremely smooth motion to protect mechanics and gears, by self-optimizing polynomial speed transitions.
- High cutting accuracy, even during acceleration and at high line speeds
- Embedded virtual master axis (selectable)
- Excellent dynamic properties by continuous closed loop control at a cycle time of only 150 µsec.
- Encoder inputs according to RS 422 standard, HTL inputs are available on request
- Cutting to length according to length preset or by triggering to print marks. Facility for making a gap after each cut
- Can operate with all 4-quadrant DC and servo drives as well as with simple 1-quadrant AC inverter drives and with hydraulic systems
- Easy PC setup by Windows operator software
- Remote setting facilities (i.e. cutting length) by either parallel interface, serial RS232/ RS485 interface or CANopen interface. PROFIBUS control is possible with use of the PB251 gateway
- Numerous useful functions like integrated batch counter, waste counter or virtual line speed simulation
- Power supply 18 – 30 VDC, built-in aux. voltage output 5 VDC for encoder supply
- +/- 10 V speed reference output for control of the carriage drive
- Closed 19‘‘ steel cassette for rack mounting and for mounting to DIN rail.
|
|
CT 150
-
Controller for Rotary Cutting and Printing Systems |
CT-150 Specifications
|
- Stand-alone controller for the motion profile of rotating cutting or printing rolls, with a line-synchronous operation phase and an asynchronous phase outside the operation range.
- Extremely smooth motion to protect mechanics and gears solution, by self-optimizing polynomial speed transitions
- High cutting accuracy, even during acceleration and at high line speeds
- Excellent dynamic properties by continuous closed loop control at a cycle time of only 150 µsec.
- Encoder inputs according to RS 422 standard, HTL (10 - 30 V) inputs are available on request
- Can operate with any 4-quadrant drive possessing a +/- 10 V speed reference input
- Easy PC setup by Windows operator software
- Remote setting facilities (i.e. cutting length) by either parallel interface, serial RS232/ RS485 interface or CANopen interface. PROFIBUS control is possible with use of the PB251 gateway
- Numerous useful functions like cutting to print marks, register control, integrated batch counter and waste counter
- Power supply 18 – 30 VDC, built-in aux. voltage output 5 VDC for encoder supply
- +/- 10 V speed reference output for control of the roll drive
- Closed 19‘‘ steel cassette for rack mounting and for mounting to DIN rail
|
FS701 - Firmware for Control of Flying Shear applications
CT702 - Firmware for Control of rotary cutter applications |
FS-701 Specifications
CT-702 Specifications
|
- MC700 and MC720 are designed as universal motion controllers for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware.
- With use of firmwares FS701 or CT702 (see download section) this unit provides excellent solutions with all kinds of flying or rotary cut-to-length systems as well as with applications like printing, punching, sealing etc.
- All functions and properties are very similar to the FS150 and CT150 controllers described above.
- The range of functions includes extended possibilities with evaluation and blanking of print marks, floating print mark registers and more
- The range of functions includes extended possibilities with evaluation and blanking of print marks, floating print mark registers and more
- Depending on the firmware in use, several axis can operate under control of one unit.
Figure top right:
MC700 hardware: Black-box unit for cabinet mounting, remote control and communication facilities via external operator terminal, serial PC communication, CANBUS, PROFIBUS etc.
|
|
